Procedure of dry method installation of tiles

 

Step1

Apply a layer (approx 3mm) of base tiles adhesive on the cement/sand screed surface.

 

Step2

Apply a layer (approx 3mm) of base tiles adhesive on the tiles.

 
 

Step3

Using a tooted trowel put a layer of base tiles adhesive (6-8mm) is again to be spread on the tiles.

 
 

Step4

Tiles should be placed slowly from an angle of 30 degree to the surface of the bottom tile adhesive.

 

Step5

Use plastic hammer for knocking of the tiles to get a better finishing effect